Notice:Please read the manual carefully before use and operate the controller only after safety operation training has been completed.

.

SRNE MPPT Solar Hybrid Charge Inverter 80A Controller Max 3500W Pure Sine Wave Inverter 48V 110V PV Volt 145V 50Hz 60Hz Off-Grid

Overview

US $591.26-610.06

HF series is a new all-in-one hybrid solar charge inverter, which integrates solar energy storage &

means charging energy storage and AC sine wave output. Thanks to DSP control and advanced control algorithm, it has high response speed, high reliability and high industrial standard. Four charging modes are optional, i.e. Only Solar, Mains Priority, Solar Priority and Mains & Solar hybrid charging; and two output modes are available, i.e. Inverter and Mains, to meet different application requirements.

The solar charging module applies the latest optimized MPPT technology to quickly track the

maximum power point of the PV array in any environment and obtain the maximum energy of the solar panel in real time.

Through a state of the art control algorithm, the AC-DC charging module realizes fully digital voltage and current double closed loop control, with high control precision in a small volume. Wide AC voltage input range and complete input/output protections are designed for stable and reliable battery charging and protection.

Based on full-digital intelligent design, the DC-AC inverter module employs advanced SPWM

technology and outputs pure sine wave to convert DC into AC. It is ideal for AC loads such as household appliances, power tools, industrial equipment, and electronic audio and video equipment.

The product comes with a segment LCD display design which allows real-time display of the operating data and status of the system. Comprehensive electronic protections keep the entire system safer and more stable.

Feature

1.Full digital voltage and current double closed loop control, advanced SPWM technology, output of pure sine wave.

2.Two output modes: mains bypass and inverter output; uninterrupted power supply.

3.Available in 4 charging modes: Only Solar, Mains Priority, Solar Priority and Mains & Solar hybrid charging.

4.Advanced MPPT technology with an efficiency of 99.9%.

5.Designed with a LCD screen and 3 LED indicators for dynamic display of system data and operating status.

6.ON/OFF rocker switch for AC output control.

7.Power saving mode available to reduce no-load loss.

8.Intelligent variable speed fan to efficiently dissipate heat and extend system life.

9.Lithium battery activation design, allowing access of lead-acid battery and lithium battery.

10.360 all-round protection with a number of protection functions.

11.Complete protections, including short circuit protection, over voltage and under voltage protection, overload protection, reverse protection, etc.

1. PV module: Convert light energy into DC power, and charge the battery through the all-in-one solar charge inverter, or directly invert into AC power to drive the load.

2. Mains or generator: Connected at the AC input, to power the load while charging the battery. If the mains or generator is not connected, the system can also operate normally, and the load is powered by the battery and PV module.

3. Battery: Provided to ensure normal power supply to the system loads when solar energy is insufficient and the Mains is not connected.

4. Household load: Allow connection of various household and office loads, including refrigerators, lamps, TVs, fans and air conditioners.

5. All-in-one solar charge inverter: The energy conversion unit of the whole system.

Appearance

Charging mode

1) PV priority: PV module will charge the battery preferentially, and the battery is charged by the Mains only when the PV system fails. During the day, solar energy is fully used to charge, while at night, it converts to the Mains. This can maintain battery level, and is ideal for areas where the grid is relatively stable and electricity price is relatively high.
2) Mains priority: The Mains supply is preferentially used to charge the battery. Only when the Mains fails, the PV charging can be activated.

3)Hybrid charging: PV and mains hybrid charging. PV MPPT charging is a priority, and when PV energy is insufficient, the mains supply supplements. When the PV energy is sufficient again, the mains stops charging. This is the fastest charging mode, suitable for the areas where power grid is unstable, providing sufficient backup power supply at any time.

4)Only Solar (Only Solar): Only PV charging, without Mains charging. This is the most energy-efficient way in which battery is charged only by solar panels, and is usually used in areas with good lighting conditions.

Technical parameters:

Battery type

Lead-acid Battery:SLD, GEL, FLD, User

Lithium Battery

Protection

1.Current limiting protection

2.Night reverse-current protection

3.Mains input overvoltage protection

4.Mains input undervoltage protection

5.Battery overvoltage protection

6.Battery low voltage protection

7.Load output short circuit protection

8.Heat sink over temperature protection

9.Overload protection

10.PV reverse polarity protection

11.AC reverse protection

12.Bypass overcurrent protection

Certification